LATEST VMWARE 2V0-41.23 VERSION - 2V0-41.23 EXAM FORUM

Latest VMware 2V0-41.23 Version - 2V0-41.23 Exam Forum

Latest VMware 2V0-41.23 Version - 2V0-41.23 Exam Forum

Blog Article

Tags: Latest 2V0-41.23 Version, 2V0-41.23 Exam Forum, 2V0-41.23 Study Reference, 2V0-41.23 Test Duration, 2V0-41.23 Exam Flashcards

Our 2V0-41.23 training materials are professional practice material under warranty. Accompanied with acceptable prices for your reference, all our 2V0-41.23 exam quiz with three versions are compiled by professional experts in this area more than ten years long. Moreover, there are a series of benefits for you. If you place your order right now, we will send you the free renewals lasting for one year. All those supplements are also valuable for your 2V0-41.23 practice materials.

VMware 2V0-41.23 Exam Syllabus Topics:

TopicDetails
Topic 1
  • VMware Solution: The topic covers VMware Virtual Cloud Network, NSX, NSX Management Cluster, NSX UI, data plane, logical switching, logical switching packet forwarding, segments, logical routing, NSX Edge, Edge Clusters, and Tier-0 and Tier-1 Gateways. Moreover, its sub-topics focus on routing, ECMP, high availability, logical routing packet walk, logical bridging, NSX segmentation, distributed firewall, distributed firewall on VDS, NSX Gateway Firewall, Intrusion Detection, and Prevention. In addition, the topic discusses concepts of NSX Application Platform, malware prevention, NSX Intelligence, NSX Network Detection and Response, NAT, DHCP, DNS, NSX Advanced Load Balancer, IPSec VPN, and L2 VPN. Lastly, the topic discusses integration of NSX with LDAP and NSX with VMware Identity Manager.
Topic 2
  • Install, Configure, Administrate the VMware Solution: Questions about NSX infrastructure, segments, NSX Edge Nodes, Tier-1 gateway, VMware NSX implementation, VMware NSX environment, Virtual Private Networks, NSX Advanced Load Balancer, and Network Address Translation. Moreover, the topic explains sub-topics related to malware prevention, NSX Application Platform, Intrusion Detection, NSX Gateway Firewall, and NSX Distributed Firewall.
Topic 3
  • Troubleshoot and Optimize the VMware Solution: It focuses on using log files for the troubleshooting of issues, identifying available tools for troubleshooting issues, and troubleshooting of common NSX issues.

>> Latest VMware 2V0-41.23 Version <<

Pass Guaranteed Quiz Authoritative VMware - Latest 2V0-41.23 Version

Knowledge is important at any time. In our whole life, we need to absorb in lots of knowledge in different stages of life. It’s knowledge that makes us wise and intelligent. Perhaps our 2V0-41.23 practice material may become your new motivation to continue learning. Successful people are never stopping learning new things. If you have great ambition and looking forward to becoming wealthy, our 2V0-41.23 Study Guide is ready to help you. All of us need to cherish the moments now. Let’s do some meaningful things to enrich our life. Our 2V0-41.23 study guide will be always your good helper.

VMware NSX 4.x Professional Sample Questions (Q10-Q15):

NEW QUESTION # 10
Refer to the exhibit.
An administrator would like to change the private IP address of the NAT VM I72.l6.101.il to a public address of 80.80.80.1 as the packets leave the NAT-Segment network.
Which type of NAT solution should be implemented to achieve this?

  • A. SNAT
  • B. NAT64
  • C. DNAT
  • D. Reflexive NAT

Answer: A

Explanation:
Explanation
SNAT stands for Source Network Address Translation. It is a type of NAT that translates the source IP address of outgoing packets from a private address to a public address. SNAT is used to allow hosts in a private network to access the internet or other public networks1 In the exhibit, the administrator wants to change the private IP address of the NAT VM 172.16.101.11 to a public address of 80.80.80.1 as the packets leave the NAT-Segment network. This is an example of SNAT, as the source IP address is modified before the packets are sent to an external network.
According to the VMware NSX 4.x Professional Exam Guide, SNAT is one of the topics covered in the exam objectives2 To learn more about SNAT and how to configure it in VMware NSX, you can refer to the following resources:
* VMware NSX Documentation: NAT 3
* VMware NSX 4.x Professional: NAT Configuration 4
* VMware NSX 4.x Professional: NAT Troubleshooting 5


NEW QUESTION # 11
Which CLI command is used for packet capture on the ESXi Node?

  • A. debug
  • B. pktcap-uw
  • C. set capture
  • D. tcpdump

Answer: B

Explanation:
Explanation
According to the VMware Knowledge Base, this CLI command is used for packet capture on the ESXi node.
pktcap-uw stands for Packet Capture User World and is a tool that allows you to capture packets from various points in the network stack of an ESXi host. You can use this tool to troubleshoot network issues or analyze traffic flows.
The other options are either incorrect or not available for this task. tcpdump is not a valid CLI command for packet capture on the ESXi node, as it is a tool that runs on Linux systems, not on ESXi hosts. debug is not a valid CLI command for packet capture on the ESXi node, as it is a generic term that describes the process of finding and fixing errors, not a specific tool or command. set capture is not a valid CLI command for packet capture on the ESXi node, as it does not exist in the ESXi CLI.
https://kb.vmware.com/s/article/2051814


NEW QUESTION # 12
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. An NSX administrator used the get gateways command to retrieve this Information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

  • A. sa-nexedge-01(tier1_dr)> get bgp neighbor
  • B. vrf 1
  • C. vrf 4
  • D. sa-nexedge-01(tier1_sr> get bgp neighbor
  • E. vrf 3
  • F. sa-nexedge-01(tier0_sr> get bgp neighbor

Answer: E,F

Explanation:
BGP will be configured on the T0 SR. Connect to the VRF for the T0 SR and run get bgp neighbor once connected to it.
https://docs.vmware.com/en/VMware-Validated-Design/5.1/sddc-deployment-of-vmware-nsx-t-workload-domai For the BGP configuration on NSX-T, the Tier-0 Service Router (SR) is typically where BGP is configured.
To check the BGP neighbor status:
Connect to the VRF for the T0 SR, which is VRF 3 based on the provided output.
Run the command to get BGP neighbor status once connected to it.


NEW QUESTION # 13
What needs to be configured on a Tler-0 Gateway lo make NSX Edge Services available to a VM on a VLAN-backed logical switch?

  • A. Service Interface
  • B. Downlink Interface
  • C. Loopback Router Port
  • D. VLAN Uplink

Answer: A

Explanation:
Explanation
A service interface is a logical interface on a tier-0 gateway that connects to a VLAN logical switch and provides NSX Edge services to the VMs on that switch. A service interface is required for services such as load balancing, VPN, NAT, and DHCP1. A downlink interface is used to connect a tier-0 gateway to a tier-1 gateway or an overlay logical switch. A VLAN uplink is used to connect a tier-0 gateway to the physical network. A loopback router port is used to assign an IP address to the tier-0 gateway for routing protocols or firewall rules2...


NEW QUESTION # 14
Which troubleshooting step will resolve an error with code 1001 during the configuration of a time-based firewall rule?

  • A. Changing the lime zone on the ESXi host.
  • B. Restarting the NTPservice on the ESXi host.
  • C. Reinstalling the NSX VIBs on the ESXi host.
  • D. Reconfiguring the ESXI host with a local NTP server.

Answer: B

Explanation:
Explanation
According to the web search results, error code 1001 is related to a time synchronization issue between the ESXi host and the NSX Manager. This can cause problems when configuring a time-based firewall rule, which requires the ESXi host and the NSX Manager to have the same time zone and NTP server settings . To resolve this error, you need to restart the NTP service on the ESXi host to synchronize the time with the NSX Manager. You can use the following command to restart the NTP service on the ESXi host:
/etc/init.d/ntpd restart
The other options are not valid solutions for this error. Reinstalling the NSX VIBs on the ESXi host will not fix the time synchronization issue. Changing the time zone on the ESXi host may cause more discrepancies with the NSX Manager. Reconfiguring the ESXi host with a local NTP server may not be compatible with the NSX Manager's NTP server.


NEW QUESTION # 15
......

You are lucky to be here with our 2V0-41.23 training materials for we are the exact vendor who devote ourselves to produce the best 2V0-41.23 exam questions and helping our customers successfully get their dreaming certification of 2V0-41.23 Real Exam. We own the first-class team of professional experts and customers’ servers concentrating on the improvement of our 2V0-41.23 study guide. So your success is guaranteed.

2V0-41.23 Exam Forum: https://www.dumps4pdf.com/2V0-41.23-valid-braindumps.html

Report this page